Subaru Auto Vehicle Hold (AVH) is a safety feature that helps drivers stay in control of their vehicle. It is designed to hold the vehicle in place when stopped on an incline, preventing it from rolling back. While this feature is useful in certain situations, some drivers may prefer to turn it off, either temporarily or permanently.
Fortunately, turning off AVH in a Subaru is a simple process. There is a button located on the upper side of the shifter that is marked with a small circle and two brackets. Pressing this button and tapping the gas pedal 2 to 3 times will turn off the AVH mode. The icon will disappear from the screen, indicating that the feature is no longer working.
If you’d rather not use this feature, it’s easy to turn off AVH in a Subaru. While some drivers may find this feature helpful, others may prefer to have more control over their vehicle. By following the steps outlined in this article, drivers can turn off AVH temporarily or permanently, depending on their preference.
Understanding Subaru AVH System
Subaru Auto Vehicle Hold (AVH) is a safety feature designed to hold the vehicle in place when stopped on an incline. The AVH system was launched in 2018 on the Subaru WRX Limited and replaced the Hill Holder and Hill Start Assist features. The AVH system is far more capable than either of those two features.
AVH is an automatic system that holds the vehicle in place when the driver comes to a stop. It engages the electronic parking brake and holds the vehicle in place until the driver presses the accelerator pedal. The AVH system is designed to make driving more comfortable and convenient, especially when driving in heavy traffic or on steep hills.
The AVH system is activated automatically when the driver comes to a stop on an incline. It is designed to hold the vehicle in place for up to 10 seconds. After 10 seconds, the system automatically turns off and releases the parking brake. The AVH system can also be turned on and off manually using the button located on the dashboard.
The AVH system is a safety feature that helps prevent the vehicle from rolling backward when the driver releases the brake pedal. It is especially useful when driving on steep hills, where the vehicle is more likely to roll backward. The AVH system is also useful when driving in heavy traffic, where the driver may need to come to a stop frequently.
In summary, the AVH system is a safety feature that engages the electronic parking brake and holds the vehicle in place when the driver comes to a stop on an incline. The system is designed to make driving more comfortable and convenient, especially when driving in heavy traffic or on steep hills. The AVH system is activated automatically and can also be turned on and off manually using the button located on the dashboard.
How to Turn Off Subaru AVH
Subaru’s Auto Vehicle Hold (AVH) feature is designed to hold the vehicle in place when stopped on an incline. While this feature can be useful in certain situations, some drivers may prefer to turn it off. Fortunately, turning off AVH is a simple process that can be done temporarily or permanently.
To temporarily turn off AVH, drivers can simply press the AVH button on the dashboard. This will disable the feature until the vehicle is turned off and restarted. It’s important to note that AVH will automatically turn back on when the vehicle is restarted, so this method is only a temporary solution.
To permanently turn off AVH, drivers will need to follow a few simple steps. These steps may vary slightly depending on the specific model and year of the Subaru vehicle, but the general process is as follows:
- Start the vehicle and make sure it is in park.
- Press the “Settings” button on the touchscreen display.
- Select “Vehicle” from the menu.
- Scroll down and select “AVH.”
- Toggle the switch to the “Off” position.
Once AVH is turned off using this method, it will remain off until it is manually turned back on using the same process.
It’s worth noting that turning off AVH may impact the vehicle’s safety in certain situations, particularly when parked on a steep incline. Drivers should carefully consider whether they want to disable this feature before doing so. Additionally, it’s important to follow all instructions and safety guidelines provided by Subaru when operating any vehicle.
Subaru AVH Features and Functions
Subaru Ascent is a mid-sized SUV that comes with several advanced features, including the Automatic Vehicle Hold (AVH) mode. The AVH mode is designed to keep the vehicle stationary without the driver having to keep their foot on the brake pedal. This feature is particularly useful in heavy traffic or when waiting at a red light.
The AVH mode can be activated by pressing the AVH button located near the shifter. Once activated, the AVH mode will hold the vehicle in place even if the driver releases the brake pedal. The AVH mode will remain active until the driver presses the accelerator pedal to move the vehicle forward.
In addition to the AVH mode, the Subaru Ascent also comes with other advanced safety features such as EyeSight Driver Assist Technology, Blind-Spot Detection, Rear Cross-Traffic Alert, and Reverse Automatic Braking. These features work together to provide a safe and comfortable driving experience for the passengers.
The following table summarizes the key features and functions of the Subaru AVH mode:
| Feature | Function |
|---|---|
| AVH Button | Activates the AVH mode |
| Instrument Panel | Displays the status of the AVH mode |
| Brake Pedal | Releases the AVH mode |
| Accelerator Pedal | Deactivates the AVH mode |
| EyeSight Driver Assist Technology | Provides advanced safety features |
| Blind-Spot Detection | Monitors the blind spots |
| Rear Cross-Traffic Alert | Detects approaching vehicles |
| Reverse Automatic Braking | Applies the brakes if an obstacle is detected |
Overall, the Subaru AVH mode is a useful feature that enhances the driving experience. It provides a safe and comfortable ride for the passengers and allows the driver to focus on the road ahead.
Troubleshooting Subaru AVH Turn Off Issues
Subaru’s Automatic Vehicle Hold (AVH) feature is a useful tool for drivers who prefer to keep their foot off the brake pedal when stopped at traffic lights or in heavy traffic. However, some Subaru owners have reported issues with turning off the AVH feature.
One common issue is that the AVH feature does not disengage even after the driver has shifted the car into gear and pressed the accelerator pedal. In such cases, the driver should try tapping the AVH button again to turn it off. If this does not work, the driver may need to try turning off the engine and restarting the car.
Another issue that some drivers have reported is that the AVH feature turns back on automatically after the car has been turned off and restarted. In such cases, the driver should check to ensure that the AVH feature is turned off before turning off the engine. If the AVH feature turns back on after the car has been restarted, the driver may need to take the car to a Subaru dealer for further inspection.
It is worth noting that the AVH feature is designed to turn off automatically when the car reaches a certain speed or when the driver presses the accelerator pedal. If the AVH feature is not turning off automatically, the driver should consult the car’s owner’s manual or contact a Subaru dealer for assistance.
In summary, if a Subaru owner is experiencing issues with turning off the AVH feature, they should try tapping the AVH button again, turning off and restarting the car, and consulting the owner’s manual or a Subaru dealer for further assistance.
Maintenance Tips for Subaru AVH System
Subaru’s AVH (Auto Vehicle Hold) system is a useful feature that holds the vehicle in place when stopped on an incline. To keep it working properly, it is important to perform regular maintenance and follow some tips to ensure the longevity of the system.
Here are some maintenance tips for Subaru AVH System:
1. Check Brake Fluid Regularly
The AVH system works by using the brake system to hold the vehicle in place. Therefore, it is essential to check the brake fluid level regularly and make sure it is at the recommended level. Low brake fluid levels can cause the AVH system to malfunction, leading to potential safety hazards.
2. Keep Brake Pads in Good Condition
Worn-out brake pads can also cause the AVH system to malfunction. Therefore, it is important to keep the brake pads in good condition by checking them regularly and replacing them when necessary. Worn-out brake pads can also cause other safety hazards, so it is crucial to replace them immediately when they are worn out.
3. Clean AVH System Components
Dirt and debris can accumulate on the AVH system components, causing them to malfunction. Therefore, it is important to clean the AVH system components regularly. Use a soft cloth to clean the components and avoid using harsh chemicals that can damage the system.
4. Follow Manufacturer’s Recommendations
Subaru provides specific instructions and recommendations for maintaining the AVH system in the owner’s manual. It is important to follow these recommendations to ensure the proper functioning of the AVH system. Regular maintenance can help prevent potential safety hazards and extend the life of the system.
In summary, regular maintenance is essential to keep the AVH system in good condition. Checking the brake fluid level, keeping the brake pads in good condition, cleaning the AVH system components, and following the manufacturer’s recommendations are some of the essential maintenance tips for the Subaru AVH system.
Safety Precautions When Using Subaru AVH
When using the Subaru Auto Vehicle Hold (AVH) feature, it is important to keep in mind some safety precautions to ensure that you and your passengers remain safe at all times. Here are some safety tips to follow when using the Subaru AVH:
- Always use the AVH feature on a flat surface or on a slope with a grade of less than 5%. Avoid using AVH on steep hills or inclines.
- Always ensure that the AVH light on the dashboard is illuminated before taking your foot off the brake pedal. This indicates that the AVH feature is active and holding the vehicle in place.
- Always keep your foot on the brake pedal when starting the engine. This will prevent the vehicle from moving unexpectedly when the engine starts.
- Always keep your seatbelt fastened when using the AVH feature. In the event of an accident, the seatbelt will help keep you in place and prevent you from being thrown around the vehicle.
- Always be aware of your surroundings and keep a safe distance from other vehicles and objects. The AVH feature is designed to hold the vehicle in place, but it is not a substitute for safe driving practices.
- Always follow the manufacturer’s instructions for using the AVH feature. If you are unsure about how to use the feature, consult the owner’s manual or contact a Subaru dealership for assistance.
By following these safety precautions, you can use the Subaru AVH feature with confidence and ensure that you and your passengers remain safe at all times.
Conclusion
In conclusion, the Automatic Vehicle Hold (AVH) feature in Subaru vehicles is a convenient safety feature that helps keep the vehicle stationary when stopped. However, some drivers may find it annoying or unnecessary in certain situations, such as when reversing slowly or when driving on uneven terrain.
Fortunately, turning off AVH in a Subaru vehicle is a simple process that can be done quickly and easily. Drivers can refer to their vehicle’s manual or use online resources to learn how to turn off AVH in their specific model.
While AVH can be a useful feature for many drivers, it is important to remember that it is not a substitute for safe driving practices. Drivers should always remain alert and attentive while behind the wheel, and should never rely solely on AVH to keep their vehicle stationary.
Overall, the decision to use or turn off AVH in a Subaru vehicle is up to the individual driver and their specific driving needs and preferences. By understanding how to turn off AVH and using it appropriately, drivers can enjoy a safe and comfortable driving experience.
Frequently Asked Questions
How do I turn off the AVH feature on my Subaru Crosstrek?
To turn off the AVH (Automatic Vehicle Hold) feature on your Subaru Crosstrek, follow these steps:
- Press the “Car Settings” shortcut button on your infotainment screen.
- Select “AVH” from the list of options.
- Toggle the switch to turn off the AVH feature.
What does the AVH light indicate on my Subaru Forester?
The AVH light on your Subaru Forester indicates that the AVH feature is active. When the AVH feature is engaged, the vehicle will automatically hold its position when you come to a stop, even on an incline.
Is there an AVH feature on the 2021 Subaru Forester?
Yes, the 2021 Subaru Forester comes equipped with the AVH (Automatic Vehicle Hold) feature. This feature can be turned on or off using the infotainment system.
What is the purpose of the AVH button on my Subaru?
The AVH button on your Subaru is used to engage or disengage the AVH (Automatic Vehicle Hold) feature. When the AVH feature is engaged, the vehicle will automatically hold its position when you come to a stop, even on an incline.
Why isn’t the AVH feature working on my Subaru Ascent?
If the AVH (Automatic Vehicle Hold) feature is not working on your Subaru Ascent, there may be an issue with the system. It is recommended to take your vehicle to a Subaru dealership for diagnosis and repair.
Can I disable the auto stop feature on my Subaru?
Yes, the auto stop feature on your Subaru can be disabled. To do so, press the “Car Settings” shortcut button on your infotainment screen, select “Auto Start-Stop,” and toggle the switch to turn off the feature.