Keystone RV furnaces are an essential component of any RV, providing warmth and comfort during chilly nights or colder seasons. However, locating the furnace in a Keystone RV can be a challenge for some new RV owners. Understanding the location of the furnace is crucial for proper maintenance and troubleshooting.
Typically, Keystone RV furnaces are located in one of two places: either in the living area or underneath the RV. In some models, the furnace may be located in a cabinet or closet, while in others, it may be found in a storage compartment. It is important to note that the location of the furnace may vary depending on the specific model and year of the RV.
Knowing the location of the furnace in a Keystone RV is not only important for maintenance and troubleshooting, but also for safety reasons. RV owners must ensure that the furnace is properly ventilated and has enough clearance around it to prevent fire hazards. By understanding the location of the furnace, RV owners can ensure that their furnace is operating safely and efficiently, providing warmth and comfort during their travels.
Keystone RV Furnace Basics
Furnace Types
Keystone RVs come with two types of furnaces: propane and electric. Propane furnaces are the most common type and use propane gas as fuel. Electric furnaces, on the other hand, use electricity to heat the air that is blown into the RV.
Furnace Operation
To operate the furnace in a Keystone RV, the first step is to turn on the thermostat. The thermostat is usually located on the wall near the furnace or in a central location in the RV. Once the thermostat is turned on, it will send a signal to the furnace to start heating the air.
The furnace will then draw in air from the RV’s interior through a return vent. The air is then heated by the furnace’s burner or heating element. Once the air is heated, it is blown back into the RV through a series of ducts and vents.
It is important to note that the furnace’s return air only pulls air from the area surrounding the furnace. Therefore, it is necessary to keep passage doors to bedrooms and bathrooms open in order to better equalize the temperature throughout the RV.
If the furnace is not producing any heat, there may be an issue with the ignition system. In this case, it is recommended to refer to the Keystone RV furnace troubleshooting guide or contact a professional for assistance.
In summary, understanding the basics of Keystone RV furnace types and operation is essential for ensuring a comfortable and cozy camping experience.
Keystone RV Furnace Location
General Location
The location of the furnace in a Keystone RV can vary depending on the model and floor plan. However, in most cases, the furnace can be found in one of the following locations:
- Under the kitchen counter
- In a cabinet near the entry door
- In a compartment outside the RV
- In a closet or wardrobe
To locate the furnace, look for a vent or grille on the floor or wall. This is where the warm air from the furnace is distributed.
Model-Specific Locations
Some Keystone RV models have specific locations for the furnace. Here are a few examples:
- In the Keystone Cougar 276RLSWE Fifth Wheel, the furnace is located under the kitchen counter.
- In the Keystone Bullet 287QBS Travel Trailer, the furnace is located in a cabinet near the entry door.
- In the Keystone Montana 3791RD Fifth Wheel, the furnace is located in a compartment outside the RV.
- In the Keystone Passport 2670BH Ultra Lite Travel Trailer, the furnace is located in a closet or wardrobe.
It’s important to consult the owner’s manual or contact Keystone customer service to determine the exact location of the furnace in your specific RV model.
Once the location of the furnace is identified, it’s important to ensure that there is proper ventilation and clearance around the unit. This will help prevent any potential safety hazards and ensure that the furnace operates efficiently. Additionally, regular maintenance and cleaning of the furnace is recommended to keep it running smoothly.
Accessing the Furnace
Accessing the furnace in a Keystone RV is essential for maintenance and repair purposes. Here are some steps to follow when accessing the furnace:
-
Locate the furnace: The furnace is usually located underneath the RV, near the propane source. The propane source is usually located at the front of the travel trailer, with a gas line supplying all of the RV appliances.
-
Remove the furnace cover: The furnace cover is usually secured with screws or clips. Use a screwdriver or pliers to remove the screws or clips and lift the cover off.
-
Inspect the furnace: Once the cover is removed, inspect the furnace for any signs of damage or wear. Check the burner, ignition source, and ductwork for any cracks or leaks. If you notice any damage, contact a professional for repairs.
-
Clean the furnace: Use a soft-bristled brush or vacuum to clean the furnace of any debris or dust. Make sure to clean the burner and ignition source to prevent any blockages.
-
Replace the furnace cover: Once the furnace is clean and inspected, replace the cover and secure it with screws or clips.
By following these steps, accessing the furnace in a Keystone RV can be done safely and efficiently. If you are unsure about any of the steps, consult a professional for assistance.
Troubleshooting Common Issues
If you’re having problems with your Keystone RV furnace, there are a few things you can check before calling for professional service. In this section, we’ll cover some common issues that can arise and how to troubleshoot them.
Furnace Not Igniting
One of the most common issues with a Keystone RV furnace is that it won’t ignite. If this happens, there are a few things you can check:
- Check the thermostat: Make sure the thermostat is set to “heat” and that the temperature is set high enough to trigger the furnace to turn on.
- Check the propane supply: Make sure there is enough propane in the tank and that the valve is open.
- Check the ignition system: If the furnace is making a clicking sound but not igniting, there may be a problem with the ignition system. Check for loose connections or a faulty component.
If none of these steps resolve the issue, it may be time to call for professional service.
Furnace Blowing Cold Air
Another common issue with a Keystone RV furnace is that it blows cold air instead of warm air. If this happens, there are a few things you can check:
- Check the thermostat: Make sure the thermostat is set to “heat” and that the temperature is set high enough to trigger the furnace to turn on.
- Check the air filter: A dirty air filter can restrict airflow and cause the furnace to blow cold air. Check the filter and replace it if necessary.
- Check the ductwork: Make sure the ductwork is properly connected and not blocked by any obstructions.
If none of these steps resolve the issue, it may be time to call for professional service.
Remember, proper maintenance and regular inspections can help prevent many common issues with your Keystone RV furnace. If you’re unsure about how to troubleshoot a problem or if you’re uncomfortable making any repairs yourself, don’t hesitate to call for professional service.
Maintenance Tips
Regular maintenance is essential to ensure the proper functioning of the Keystone RV furnace. Here are some tips to keep the furnace in good condition:
-
Clean the furnace regularly: Dirt and debris can accumulate in the furnace, reducing its efficiency. Regular cleaning of the furnace can help prevent this. Use a soft brush or vacuum cleaner to remove any dirt or debris from the furnace.
-
Replace the air filter: The air filter in the furnace should be replaced periodically. A dirty or clogged air filter can reduce the efficiency of the furnace and also affect the air quality inside the RV. Check the air filter every month and replace it if it is dirty.
-
Check the furnace ducts: The furnace ducts should be checked periodically for any blockages or leaks. Blockages in the ducts can reduce the efficiency of the furnace, while leaks can cause the furnace to work harder than necessary. Use a flashlight to check the ducts for any blockages or leaks.
-
Check the furnace burners: The furnace burners should be checked periodically for any signs of wear or damage. If the burners are dirty or damaged, they can affect the efficiency of the furnace. Use a soft brush to clean the burners and check for any signs of wear or damage.
-
Check the furnace blower: The furnace blower should be checked periodically for any signs of wear or damage. A worn or damaged blower can reduce the efficiency of the furnace. Use a soft brush to clean the blower and check for any signs of wear or damage.
-
Check the furnace ignition system: The furnace ignition system should be checked periodically for any signs of wear or damage. If the ignition system is not working properly, the furnace may not start or may not work efficiently. Check the ignition system for any signs of wear or damage and replace any faulty components.
By following these maintenance tips, the Keystone RV furnace can provide efficient and reliable heating for many years.
Safety Precautions
When dealing with an RV furnace, it is important to take certain safety precautions to prevent accidents or injuries. Here are some tips to keep in mind:
-
Turn off the furnace before doing any maintenance: Always turn off the furnace and wait for it to cool down before attempting any maintenance or repairs. This will prevent burns and other injuries from hot surfaces.
-
Wear protective gear: When working on the furnace, wear protective gear such as gloves and safety glasses to protect your hands and eyes from sharp edges and debris.
-
Check for gas leaks: Before turning on the furnace, check for gas leaks by using a gas detector or soapy water. If you detect a leak, turn off the gas supply and call a professional for repairs.
-
Keep the furnace area clear: Make sure the area around the furnace is clear of any flammable materials such as paper, fabric, or chemicals. This will prevent fires and other hazards.
-
Follow manufacturer instructions: Always follow the manufacturer’s instructions when operating or maintaining the furnace. This will ensure that you are using the furnace safely and correctly.
By following these safety precautions, you can ensure that your RV furnace operates safely and efficiently.
Frequently Asked Questions
Where is the furnace located in my Keystone RV?
The furnace in your Keystone RV is typically located in one of two places: either in the front of the RV, underneath the master bedroom, or in the rear of the RV, underneath the bunkhouse. The exact location may vary depending on the model and year of your Keystone RV.
How do I access the furnace in my RV?
To access the furnace in your Keystone RV, you will need to locate the furnace door on the exterior of your RV. This door is typically located on the side of the RV, near the front or rear of the unit. Once you locate the door, you can open it to access the furnace.
What are common Keystone RV furnace problems?
Some common Keystone RV furnace problems include a fuse that keeps popping out of the plug, inadequate heating, a thermostat that does not work properly, ignition sensor problems, sail switch problems, damaged wiring, and noisy operation. If you are experiencing any of these issues, it is important to troubleshoot your furnace as soon as possible to prevent further damage.
How do I troubleshoot my RV furnace?
To troubleshoot your Keystone RV furnace, you should start by checking the thermostat to make sure it is set correctly and functioning properly. You should also check the furnace filter to make sure it is clean and free of debris. If these steps do not resolve the issue, you may need to check the furnace’s electrical connections, ignition system, and other components.
Where can I find Dometic furnace parts?
If you need to replace parts for your Dometic furnace, you can typically find them at your local RV dealer or online. Some popular online retailers for RV parts and accessories include Camping World, Amazon, and etrailer.com.
What is the location of the Dometic furnace limit switch?
The location of the Dometic furnace limit switch may vary depending on the model and year of your Keystone RV. However, in most cases, the limit switch is located on the furnace itself, near the burner assembly. If you are having trouble locating the limit switch, you should consult your Keystone RV owner’s manual or contact a certified RV technician for assistance.